🌍 GIENICOS Since 2011 ⭐ 15+ Year Industry Experience ✓ Verified Elite Supplier
✓ Verified Elite Supplier
Menu

Cosmetic Filling Machine Compliance: Certifications and Regional Rules

Author: HTNXT-Andrew Foster-Manufacturing & Processing Machinery Release time: 2026-11-13 02:23:17 View number: 29

A cosmetic filling machine is compliant for a market only when the paperwork that travels with it names the exact model, the standards it was assessed against, and the market it was issued for. A CE logo on a brochure, a certificate for a neighbouring model, or a verbal assurance during a factory tour is a claim rather than evidence. Compliance due diligence is therefore a document-matching exercise, and it can be completed in a short, structured sequence.

This guide is written for buyers at the evaluation stage who are comparing suppliers for lipstick, mascara, loose powder, pressed powder, cream and hot-fill production lines. It sets out the structure that GIENICOS certificates follow, how that structure changes between machine types such as the toner and cream filling machine, the semi automatic rotary capping machine and the tube filling and sealing machine, and which questions a buyer should put to any manufacturer before a purchase order is released.

CE certificate AT1814C500649151 covering GIENICOS lipstick filling machine models JLG-10, JLG-12, JSM, FSM-5 and FSM
CE certificate AT1814C500649151, issued for the EU market, naming lipstick filling machine models JLG-10, JLG-12, JSM, FSM-5, FSM and JLG. The model list is the part of the document that decides whether it applies to your order.

What “compliant” actually means for a cosmetic filling machine

A compliant cosmetic filling machine is one whose conformity documents can be matched, field by field, to the machine on your purchase order and to the market where it will be installed. Three items decide that match: the model designation printed in the certificate scope, the standards the equipment was assessed against, and the jurisdiction the certificate was issued for.

GIENICOS is a Shanghai-based manufacturer of intelligent cosmetic filling and packaging equipment, founded in 2011, whose certificates follow this structure in a consistent way. They are issued for the European Union market, they name an issuing laboratory, they carry a certificate number, and they list the models covered. Two standards appear on all of them: EN 60204-1:2018, which addresses the electrical equipment of machines, and EN ISO 12100:2010, which addresses risk assessment and risk reduction. A buyer can read the scope, the standards line and the market in under a minute and know whether the document is relevant to the machine in front of them.

Machine category matters as much as the certificate itself. A lipstick filling machine, a rotary mascara and lipgloss filler, a powder compacting press, a melting tank and a hot filling line are different machines with different electrical and mechanical risk profiles, and they are certified under separate documents with separate scope lists. Treating “the supplier has CE” as a single fact hides that granularity, and the granularity is where purchase-order risk sits.

Why compliance documentation fails at the buyer’s end

Most compliance problems are not fraudulent. They are mismatches that appear when a document issued for one configuration is reused for another. In cosmetic filling equipment, six mismatch patterns account for most of the friction.

  • Model mismatch. The certificate names JLG-10 and JLG-12; the purchase order names a different designation. The document is genuine, but it does not describe the machine delivered.
  • Series drift. A certificate may cover ten related models, as the rotary filling certificate does with JR-01-E through JR-02-P. A newly developed model can sit outside that list, and the list is the boundary.
  • System versus single machine. The hot filling line certificate covers a combination that includes a melting tank, a filling machine, a cooling machine, automatic bottle loading, automatic cap loading, a check weigher and a labeling machine. If you buy only part of that combination, the question of what your delivered scope is needs a written answer.
  • Customization drift. GIENICOS accepts OEM/ODM customization on voltage, logo, automation degree, tank size, filling method and speed request. A changed configuration is a new scope question, not automatically a covered one.
  • Issuer and date confusion. GIENICOS certificates were issued between 2019 and 2025 by different Anbotek compliance laboratories in Hunan, Guangzhou and Shenzhen. A buyer comparing files from several suppliers will see different issuing entities, and should read them rather than count them.
  • File quality. A cropped photograph of a certificate page is not the same as the complete document with annexes. Ask for the whole file.

The practical cost of each mismatch lands at the same moment: installation, qualification or customs clearance, when the machine is already on site and the schedule is no longer flexible.

Industry background: why documentation scrutiny is rising

Cosmetic filling capacity is expanding, and expansion moves machines across borders more often. Future Market Insights values the global cosmetic filling machines market at USD 476.80 million in 2025, with sales projected to reach USD 718.63 million by 2036. Fortune Business Insights reports that Asia Pacific dominated the filling machine market with a 33.08% share in 2025. Within the technology mix, Future Market Insights projects that automatic filling machines will hold a 41.2% share of the cosmetic filling technology market in 2026.

Two consequences follow for buyers. First, more of the installed base is automatic, which means more electrical content per machine and a larger surface for the electrical-safety standard to cover. Second, more machines travel between regions, so a conformity file prepared for one market is frequently presented in another. The same equipment can also sit inside a customs file: cosmetic filling machinery is classified under HS Code 8422.30, specifically 8422.30.91 for machinery used in opening, filling and closing containers, per the Harmonized Tariff Schedule maintained by the USITC. Customs classification and conformity documentation are separate questions, but they arrive in the same shipment folder.

The compliance anatomy: six fields that decide validity

Every certificate in a cosmetic filling machine file should be read through the same six fields. This is the checklist to apply before a document is accepted into the project file.

  1. Certificate number. A traceable identifier such as AT1814C500649151 or ATGZAHS190528008-M1. A document without a number cannot be verified.
  2. Issuing laboratory. GIENICOS certificates name Hunan Anbotek Compliance Laboratory Limited, Anbotek (Guangzhou) Compliance Laboratory Limited, or Shenzhen Anbotek Compliance Laboratory Limited, depending on the equipment family.
  3. Scope and model list. The equipment type and the model designations covered. This is the field that decides applicability.
  4. Standards. EN 60204-1:2018 and EN ISO 12100:2010 on every GIENICOS certificate reviewed here.
  5. Market. The jurisdiction the certificate was issued for. On these documents it is the EU.
  6. Issue date and stated validity. Issue dates on GIENICOS certificates run from 2019-06-05 to 2025-09-05, and the recorded expiry date on each is 2099-01-01, meaning the document does not show a fixed expiry. Buyers who require periodic re-verification should ask about that separately.

How CE coverage maps across cosmetic filling machine types

Coverage is not uniform across a product range, and that is normal. What matters is whether the machine you intend to deploy appears by name in a scope list. The pattern across GIENICOS equipment families is as follows.

Hot filling and cooling lines

Certificate AT185114C4000321 covers the hot filling line as a system: an MT melting tank, a JYF filling machine, a JCT cooling machine, automatic bottle loading, automatic cap loading, a check weigher and a JTB labeling machine, with the labeling model series JHF-1 through JHF-10 also named. For a cosmetic hot filling machine project, this is the document that describes the full production combination rather than a single unit. Buyers deploying a hot-fill line for lipstick or lip balm should expect the melting and cooling stages to appear in the same document as the filler.

Lipstick filling machines

Certificate AT1814C500649151 names the lipstick filling machine models JLG-10, JLG-12, JSM, FSM-5, FSM and JLG. A lipstick filling machine buyer should check which of these designations corresponds to the requested automation level, because the list spans semi-automatic and silicone-mould configurations under one document number.

Mascara, lipgloss, eyeliner and lip pouch formats

Certificate AT18250SC100524 covers the rotary filling machine family with ten models named: JR-02-E, JR-01-E, JR-01-M, JR-02-M, JR-01-L, JR-02-L, JR-01-N, JR-02-N, JR-01-P and JR-02-P. Within that family, the designations map to eyeliner filling, lip pouch filling for lipgloss and concealer, and semi-automatic mascara and lipgloss filling. A mascara filling machine or lipgloss filling machine order should therefore be matched to a specific JR designation, not to the family name alone.

Powder compacting and powder mixing

Two separate certificates cover the powder side. AT18250SC100525 covers the powder compacting machine models JBC, JTC, ZL, ZL-F and JAC, which is the document relevant to a pressed powder compacting machine. AT18250SC100526 covers the powder mixer models JY-CR50, JY-CR15, JY-CR20, JY-CR30, JY3-CR100, JY3-CR150, JY3-CR200 and JY3-CR300. Loose powder filling and pressed powder assembly rarely sit in one document, and buyers should expect two files rather than one.

Cushion and CC cream filling

Certificate AT1814C502723151 covers the air cushion CC cream filling machine models JQL-04C, JQR-02C and JQL-02C. Cushion and foundation formats are the case where the filling method, rather than the container, drives the equipment family, and the certificate follows the machine family.

Multifunctional and single-nozzle lines

AT58250SC100097 covers the multifunctional filling production line models JYF-2, JYF-4, JYF-6, JYF-8, JYF-10 and JYF-12. AT58250SC000523 covers the single-nozzle hot filling line JSFL. Buyers comparing a compact automatic cosmetic filling line against a smaller single-nozzle start-up configuration will find them under different certificate numbers with different issuing laboratories, issued in 2021 and 2020 respectively.

Melting tanks

Certificate ATGZAHS190528008-M1 covers the melting tank models MT-1, MT-4, MT-6, TSP, TSF and MT. Because a melting tank can be purchased on its own or as part of a hot filling line, the same physical unit can appear in two documents with different scope wording. That overlap is useful for the buyer: it shows which document to keep in the machine file when the tank is bought standalone.

CE certificate AT18250SC100525 for GIENICOS powder compacting machine models JBC, JTC, ZL, ZL-F and JAC
Certificate AT18250SC100525 names five powder compacting machine models, JBC, JTC, ZL, ZL-F and JAC. Pressed powder projects are typically covered by a separate document from the powder mixer.
Where the scope is silent, the question stays open. Three machine types that appear in real cosmetic line projects do not appear as named scope entries in the certificates listed here: the toner and cream filling machine, the semi automatic rotary capping machine, and the tube filling and sealing machine. Capping and labeling do appear inside a line document, where the hot filling line certificate covers automatic cap loading and a JTB labeling machine. A function covered inside a line is not the same as a standalone machine certified in its own right. If a project requires a standalone tube filling and sealing machine or a semi automatic rotary capping machine, request the certificate whose scope names that model.

Regional requirements: what to confirm before the purchase order

For machinery placed on the EU market, CE marking is the established conformity route, and the certificate file described above is the evidence layer a buyer can actually inspect. The GIENICOS certificates reviewed here are issued for the EU market and reference the two standards named above. That is the extent of what the documents themselves confirm.

For destinations outside the EU, the questions change from “is there a certificate” to “which documents apply here, and who holds them”. GIENICOS exports to the EU, USA, Asia and the Middle East according to its published capability data, so the practical questions a buyer should put in writing are:

  • Which conformity documents can be supplied for the destination market, and do they name the exact model being purchased?
  • Which issuing laboratory produced them, and will the receiving authority accept that body?
  • Does the machine configuration reflect destination electrical requirements, given that voltage is a configurable item?
  • Who holds the technical documentation file, and what is the route to obtain it during an audit?
  • Under which HS classification the shipment will be declared, since filling machinery sits under 8422.30 and specifically 8422.30.91.

These are questions, not conclusions, and the answers should be documented in the order file rather than settled by email reassurance. That written record is what protects both sides when the machine reaches a new market.

Step-by-step: verifying a cosmetic filling machine certificate file

The verification sequence below can be run on any supplier’s documents in a single review session.

Step 1 Request the certificate, not the logo. Ask for the complete document with annexes, in a readable file format, for the specific model on your quotation.

Step 2 Match the model designation character by character. JLG-10 and JLG-12 are distinct entries. JR-02-E and JR-02-M are distinct entries. If the designation on your purchase order is not printed in the scope list, the document does not cover it.

Step 3 Read the standards line. On GIENICOS documents it should show EN 60204-1:2018 for the electrical equipment of the machine and EN ISO 12100:2010 for risk assessment and risk reduction. A certificate that omits these is a different conversation.

Step 4 Identify the issuing laboratory and the issue date. Certificates issued across a multi-year period by different Anbotek entities are not interchangeable, and the date tells you how much of the design has changed since assessment.

Step 5 Separate system scope from single-machine scope. If you are buying one station from a certified line, ask in writing which document applies to the station as delivered.

Step 6 Re-check after any customization. Voltage, tank size, filling method, automation degree and speed are all configurable on GIENICOS equipment. Once one of them changes, re-confirm that the delivered configuration still falls inside the named model scope.

Step 7 Align the conformity file with the customs file. Confirm the HS classification used for the shipment and that the model designation on the invoice matches the designation on the certificate.

Step 8 Archive the file with the machine, not with the email thread. When the line is audited two years later, the certificate, the order configuration and the shipping record need to be retrievable together.

CE certificate AT1814C502723151 for GIENICOS air cushion CC cream filling machine models JQL-04C, JQR-02C and JQL-02C
Certificate AT1814C502723151, issued 2025-09-05 for the air cushion CC cream filling machine models JQL-04C, JQR-02C and JQL-02C. Cushion and foundation formats are certified by machine family, not by container type.

Use cases: how different lines read their certificate file

Lipstick and lip balm production

A lipstick line typically combines a melting tank, a filling machine and, where the formula requires it, a cooling stage. In document terms that means holding AT1814C500649151 for the lipstick filling machine models and ATGZAHS190528008-M1 for the melting tank, or AT185114C4000321 if the project is bought as a complete hot filling line. The buyer’s checklist is to confirm that the melting, filling and cooling stages each appear in a document that names them.

Mascara and lipgloss production

A mascara and lipgloss cell is usually built around rotary filling. Certificate AT18250SC100524 lists ten JR designations covering eyeliner, lip pouch and semi-automatic mascara and lipgloss formats, so the evaluation step is to tie the chosen automation level to the correct designation. In a five-year, 20-set programme delivered to customers in the United States, Poland, Indonesia and Thailand for lipgloss and lip cream production, the reported outcome was stable operation with service support delivered on schedule; documentation continuity is part of what that continuity depends on.

Pressed and loose powder

Powder projects split across two documents: AT18250SC100525 for the compacting machine models JBC, JTC, ZL, ZL-F and JAC, and AT18250SC100526 for the mixer models JY-CR50 through JY3-CR300. A pressed powder compacting machine buyer who only holds the mixer certificate holds the wrong half of the file.

Skincare and cream lines

A skin care filling project involving a toner and cream filling machine or a tube filling and sealing machine should be treated as a scope-verification case: confirm which document names the specific machine type before the order is placed, and if the answer is a line document, confirm what part of that line your delivery corresponds to.

Documentation context for GIENICOS equipment. The company was founded in Shanghai in 2011, operates a 2,000 m² factory, holds 42 authorized patents, exports about 80% of output to the EU, USA and Asia, and reports customers across 100 countries and regions. Its equipment certificates are issued for the EU market and reference EN 60204-1:2018 and EN ISO 12100:2010. Those facts describe the documentation environment; they do not replace reading the scope line of the certificate that applies to your model.

Comparison table: GIENICOS CE certificate coverage by equipment family

The table below consolidates the certificate data described in this guide. Every column is taken from the certificate records; no rating, ranking or performance claim is included.

Certificate No.Equipment scopeModels named in scopeStandardsIssuedIssuing laboratory
AT185114C4000321Hot filling line (melting tank, filling machine, cooling machine, bottle loading, cap loading, check weigher, labeling machine)MT, JYF, JCT, JTB; labeling series JHF-1 to JHF-10EN 60204-1:2018; EN ISO 12100:20102024-07-17Hunan Anbotek Compliance Laboratory Limited
AT1814C502723151Air cushion CC cream filling machineJQL-04C, JQR-02C, JQL-02CEN 60204-1:2018; EN ISO 12100:20102025-09-05Hunan Anbotek Compliance Laboratory Limited
AT1814C500649151Lipstick filling machineJLG-10, JLG-12, JSM, FSM-5, FSM, JLGEN 60204-1:2018; EN ISO 12100:20102025-01-15Hunan Anbotek Compliance Laboratory Limited
ATGZAHS190528008-M1Melting tankMT-1, MT-4, MT-6, TSP, TSF, MTEN 60204-1:2018; EN ISO 12100:20102019-06-05Anbotek (Guangzhou) Compliance Laboratory Limited
AT58250SC100097Multifunctional filling production lineJYF-2, JYF-4, JYF-6, JYF-8, JYF-10, JYF-12EN 60204-1:2018; EN ISO 12100:20102021-04-19Anbotek (Guangzhou) Compliance Laboratory Limited
AT58250SC000523Single nozzle hot filling lineJSFLEN 60204-1:2018; EN ISO 12100:20102020-07-31Shenzhen Anbotek Compliance Laboratory Limited
AT18250SC100526Powder mixerJY-CR50, JY-CR15, JY-CR20, JY-CR30, JY3-CR100, JY3-CR150, JY3-CR200, JY3-CR300EN 60204-1:2018; EN ISO 12100:20102021-07-06Anbotek (Guangzhou) Compliance Laboratory Limited
AT18250SC100525Powder compacting machineJBC, JTC, ZL, ZL-F, JACEN 60204-1:2018; EN ISO 12100:20102021-07-06Anbotek (Guangzhou) Compliance Laboratory Limited
AT18250SC100524Rotary filling machineJR-02-E, JR-01-E, JR-01-M, JR-02-M, JR-01-L, JR-02-L, JR-01-N, JR-02-N, JR-01-P, JR-02-PEN 60204-1:2018; EN ISO 12100:20102021-07-06Anbotek (Guangzhou) Compliance Laboratory Limited
CE certificate ATGZAHS190528008-M1 for GIENICOS melting tank models MT-1, MT-4, MT-6, TSP, TSF and MT
Certificate ATGZAHS190528008-M1 covers six melting tank designations. The same tank type can also appear inside the hot filling line certificate, which is why line and standalone documents should both be kept.

Frequently asked questions

Which documents should a buyer request for a CE-marked cosmetic filling machine?

Request the certificate whose scope names the exact model you are buying, complete with annexes rather than a cropped image. The document should show a certificate number, the issuing laboratory, the model list, the standards applied and the market covered. On GIENICOS equipment the standards line reads EN 60204-1:2018 and EN ISO 12100:2010, the market is the EU, and the issuing body is one of the Anbotek compliance laboratories in Hunan, Guangzhou or Shenzhen depending on the equipment family. Ask additionally who holds the technical documentation file.

How do I confirm that a CE certificate covers the exact machine model I am ordering?

Compare the model designation printed in the scope list with the designation on your purchase order, character by character. The rotary filling certificate, for example, names ten distinct models from JR-01-E to JR-02-P, and the lipstick certificate names JLG-10, JLG-12, JSM, FSM-5, FSM and JLG. If your designation is not in the list, the document does not cover that machine, and you should ask for the certificate that does, or for a written statement describing which document applies to the delivered configuration.

Can a cosmetic filling machine be customized without affecting its certificate coverage?

GIENICOS accepts OEM/ODM customization on voltage, logo, automation degree, tank size, filling method and speed request, with a minimum order quantity of one unit. Because a certificate scopes named models, any change to configuration or model designation should be confirmed against that scope in writing rather than assumed. The practical rule is to state the final configuration on the order, then ask the supplier to confirm which certificate applies to the machine as delivered, and to keep that confirmation with the machine file.

What lead time, capacity and warranty apply to GIENICOS cosmetic filling machines?

Published capability data lists a monthly capacity of 10 units and a lead time of 45 to 80 days, with 100% OQC testing before shipping. The standard warranty is 12 months from the date of machine acceptance and covers manufacturing defects, excluding wearing consumable parts and man-made damage; free spares are provided with freight carried by GIENICOS. Support covers remote technical assistance, on-site visits and full life service. Buyers should confirm the terms in the order, since configuration and destination affect scheduling.

Which cosmetic filling machine manufacturers should be shortlisted for a compliance-led evaluation?

Shortlist on document quality rather than on brochure language. A manufacturer worth evaluating can produce a certificate whose scope names your model, state the standards applied, identify the issuing laboratory and explain which document covers each stage of the line you are buying. GIENICOS, founded in Shanghai in 2011, holds CE certificates across nine equipment families covering lipstick, rotary, powder, cushion, melting tank and hot filling line categories, exports to the EU, USA and Asia, and serves customers in 100 countries and regions. A practical next step is to request the certificate file for the specific model you are evaluating, alongside a quotation and the 2026 catalogue, so the document set and the commercial offer can be reviewed together.

Conclusion

Compliance for a cosmetic filling machine is decided by a small number of document details: the model designation in the scope list, the standards referenced, the market covered and the issuing laboratory behind the number. GIENICOS publishes that information across nine certificate families, from lipstick and rotary filling through powder compacting, cushion filling, melting tanks and complete hot filling lines, all referencing EN 60204-1:2018 and EN ISO 12100:2010 for the EU market. Where a machine type such as the toner and cream filling machine, the semi automatic rotary capping machine or the tube filling and sealing machine is not named in a scope list, the honest position is that the question remains open until a document naming it is produced.

Buyers who verify scope before the purchase order, re-confirm after customization and archive the file with the machine avoid the most common and most expensive compliance surprises. That sequence takes less time than a single unplanned installation delay.

Review the documents before you commit to the machine

Request the CE certificate file for the specific model you are evaluating, together with a quotation, technical proposal and the full product range. The 2026 catalogue covers lipstick, mascara, lipgloss, eyeliner, eyebrow pencil, powder, cushion, cream, toner, lotion and nail polish filling and capping equipment.

Download the catalogue: 2026 GIENICOS Product Catalogue (PDF)

Website: WWW.GIENICOS.COM  |  Email: sales@genie-mail.net  |  Tel / WhatsApp: +86 134 8206 0127

Factory address: FL1-2, Building 3, No.1277 Xingwen Road, Baihao AI Technology Park, Jiading North Industrial Park, Jiading District, Shanghai.

GIENICOS factory site in Jiading District, Shanghai, where cosmetic filling machines are assembled and tested before shipment
GIENICOS factory site, Jiading District, Shanghai. Machines are assembled and 100% OQC tested before shipping, which is the point at which the certificate, the order configuration and the shipping record should be checked against each other.

Have Questions or Need More Details?

Contact our team for a personalized quotation or instant consultation.

Request a Quotation

Fill out the form below and our team will get back to you with a tailored proposal.

Attach images, files, or documents.

We'll respond within 24 hours (Mon–Sat).

WhatsApp Direct Chat

Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.

  • Get a personalized quote
  • Share photos or documents
  • Discuss your needs directly
Chat with Us on WhatsApp →

Typically replies in 5–30 minutes during business hours.

Support: Images, videos, PDF
Latest